- Navigation
- Tensile Testing Machines
- Environmental Testing
- Insertion Pull Force Testing
- Torsion Testing Machines
- Battery Testing Machines
- Combustion Testing Machines
- IPX Waterproof Testing
- Mobile Phone and Tablet
- Button Test Machines
- Mouse Testing Machines
- Wire Testing Machines
- Earphone Testing Machines
- Textile Testing Machines
- Impact Testers
- Tape Testing Equipment
- Drop Testing Machines
- Luggage Testing Machines
- Coating and Ink Testing
- Carton and Cardboard Testing
- Simulation Vibration Table
- Hardness Testing Equipment
- Erichsen Cupping Testing
- Customized Fixtures
- Electrostatic Discharge Genera
- Baby Stroller Testing Machines
- Pressure Testing Machines
- Packaging Testing Machines
- Ink Testing Machines
- Coating Testing Machines
- Others
- Mask tester
- Abrasion Testers
Contact Information
Tel：86-0755-27266729
Fax：86-0755-27266486
Mobile：86-18922863765
Q Q：3393844152
Email：1034236728@qq.com
Web：http://en.xiangminyiqi.com
Battery Impact Testing Machine
- Battery Impact Testing Machine
Product Details
Product Details
1. Test Method
The test method of the power battery impact tester is to place the test sample battery on a flat surface, and a rod with a diameter of 15.8 mm (5/8 inch) is placed at the center of the sample. A 9.1 kg or 10 kg weight thing dropped from the height (61 CM or 100 CM) onto the sample. In addition, our company also produces battery extrusion testing machine, battery acupuncture testing machine, battery thermal shock testing machine, battery burning testing machine and so on.
2. Technical Parameter
Falling ball weight | 9.1kg,10kg (can be customized) |
Falling height | 5~1000mm (You can lift weights to a certain height, and make up to ensure that heavy objects fall in the vertical direction, do not tilt, do not shake;Drop height can be customized ) |
Rod diameter | 15.8 mm |
Lifting Method | Electronic lift |
Bottom impact surface size | 200*200 |
Exhaust air port | 150mm rear of the enclosure |
Window size | 200*200mm (10mm thickness Double explosion-proof glass) |
Inner chamber material | SUS#304 |
Outside chamber material | Galvanized cold plate paint treatment |
Upper and lower impact surface | stainless steel plate + black painting |
Power supply | 1∮，AC220V，3A |
Weight | About 105KG |
Size | 600*600*1500mm |
3. Machine structure:
Upper and lower impact surface: stainless steel plate + white painting
Inner box material: SUS#304 stainless steel plate
Outer box material: cold plate paint
Impact mode: Free fall impact (fully conforms to UL, ICE, GB/T 18287 and other standards)
Chamber Door: single door, double door, open observation window, cold handle door lock
Protection device: upper and lower limit protection switch, safety pin (located at the bottom of the guide tube, protects against sudden power failure)
4. Main electrical components:
Electromagnet: Taiwan
Button switch: Jin Hong
5. Conditions of Use:
Use voltage: 220V ± 10% 50HZ
Use environment: normal temperature
Standard configuration: one test machine, two standard dropping ball, two safety bolts, one limit rod, one limit switch
