- Navigation
- Tensile Testing Machines
- Environmental Testing
- Insertion Pull Force Testing
- Torsion Testing Machines
- Battery Testing Machines
- Combustion Testing Machines
- IPX Waterproof Testing
- Mobile Phone and Tablet
- Button Test Machines
- Mouse Testing Machines
- Wire Testing Machines
- Earphone Testing Machines
- Textile Testing Machines
- Impact Testers
- Tape Testing Equipment
- Drop Testing Machines
- Luggage Testing Machines
- Coating and Ink Testing
- Carton and Cardboard Testing
- Simulation Vibration Table
- Hardness Testing Equipment
- Erichsen Cupping Testing
- Customized Fixtures
- Electrostatic Discharge Genera
- Baby Stroller Testing Machines
- Pressure Testing Machines
- Packaging Testing Machines
- Ink Testing Machines
- Coating Testing Machines
- Others
- Mask tester
- Abrasion Testers
Contact Information
Tel：86-0755-27266729
Fax：86-0755-27266486
Mobile：86-18922863765
Q Q：3393844152
Email：1034236728@qq.com
Web：http://en.xiangminyiqi.com
QCJ Powder paint film impact tester
- QCJ Powder paint film impact tester
Product Details
Product Details
1. Main Function
It is used for the coating test of metal film on metal substrate, designed according to GB/T1732-93. The weight of the fixed mass standard falls on the test sample plate of the coating layer at a certain height, and the maximum height which does not cause the damage of the coating film is observed, expressed in units of kg.cm.
2. Technical Parameter
Ball Weight | 1000g |
Drop height | 50cm/100cm/120cm |
Punch diameter | Punch diameter |
3. You can also order the following specifications (100 and 120 can be customized)
Model | QCJ—120 | QCJ—120A | QCJ—120B | QCJ—120C |
Instrument scale length | 120±5px | 120±5px | 120±5px | 120±5px |
Value | 25px | 25px | 25px | 25px |
Hammer component quality | (1000±1)g | (1000±1)g | (1000±1)g | (1000±1)g |
Punch steel ball diameter | SΦ8mm | SΦ16mm | SΦ16mm | SΦ12.7mm |
Pillow block hole diameter | Φ15mm | Φ15mm | Φ16.3mm | Φ16.3mm |
Radius of curvature | R2.5~3mm | R2.5~3mm | R2.5~3mm | R2.5~3mm |
Impact head impact depth | (2±0.1)mm | (2.5±0.1)mm | (2.5±0.1)mm | (2±0.1)mm |
Standard | GB/T1732-93 | GB/T5237.4 | ASTM.D2794-92 | GB/T17748 |
